Request Your Info Pack
Fill in the quick form below to request your free Home Lift information pack—no pressure, no obligation.
The TSL 500 raises a wheelchair over a small change in floor level, such as an internal step or a short rise at an entrance.
The TSL 500 uses a hydraulic scissor drive to cover a short rise. With a bridging step where appropriate, someone using the steps on foot can continue to share the same route. An alternative upper landing gate arrangement is available for other layouts.
Step lift
Wheelchair access over a short indoor rise
Up to 500 mm
250 kg
Bridging step or upper-level gate options
800 mm internal platform width
Check the rise, platform approach and space at the upper landing. Ask which configuration suits a route that is also used on foot.
The supplier offers bridging steps or upper-level gate protection depending on the layout. Confirm platform length and wheelchair fit.
Terry lists continuous-pressure operation and an automatic wheelchair arrestor mechanism. Ask how the arrestor, gate or bridging step interacts with the approach on your property.
Contact the team about our home lifts for expert help choosing the right model for your space.
Get in TouchWheelchair access over a short indoor rise.
The published internal platform is 800 mm wide. It is worth trialling the approach with the actual wheelchair, especially if the transfer area is narrow or angled.
Compare other home lifts or read our home lift versus stairlift guide.
| Lift type | Step lift |
|---|---|
| Typical use | Wheelchair access over a short indoor rise |
| Travel | Up to 500 mm |
| Rated load | 250 kg |
| Entrance | Bridging step or upper-level gate options |
| Size to check | 800 mm internal platform width |
Dimensions describe the part listed in the table. Ask for the full installation drawing and clearances for your configuration.
Fill in the quick form below to request your free Home Lift information pack—no pressure, no obligation.
Arrange a friendly home visit to assess your space and discuss options tailored to your needs.
If you're happy to go ahead, finalise the details and schedule your installation timeline.
Any required building works—such as creating the ceiling cut-out—are arranged ahead of the lift’s arrival.
Your lift is installed by installers qualified for that particular model. The survey confirms site preparation and the installation timescale.
The service doesn’t end at installation. You’ll have access to ongoing support, maintenance advice, and peace of mind for years to come.